AJD 125-6

Producer

John Deere

Engine Model

4045HFG20

Cylinder and Design

4 cylinders - in line

Bore and Stroke (mm)

106 X 127

Total Cylinder Volume (L)

4.5

Compression Ratio

17.0:1

Engine Speed (rpm)

1800

Standby Power (kW/hp)

115/156

Prime Power(kW/hp)

105/143

Block Heater (Adt)

1

Block Heater Power (Watt)

750

Governor System

Mechanic

Air Filter<br>

Dry Type

Air intake

Turbo Charged

Oil Capacity (L)

12

Max. Oil Temperature ⁰C (F)

115

Fuel Type

Diesel

Injection Type

Direct

Fuel Pump Type

Delphi DP100G

Operating Voltage (Vdc)

12 Vdc

Battery and Capacity (Unit/Ah)

1x66

Cooling Method

Water Cooled

Coolant Capacity (engine only)l (gal)

9/25

Exhaust Gas Flow (m³/min)

23.8

Exhaust Back Pressure in-Hg (kPa)

7.5

Exhaust Gas Temperature ⁰C (F)

550

Fuel Consumption at 50% Prime Load l/h (kg/h)

0.8

Fuel Consumption at 75% Prime Load l/h (kg/h)

1.6

Fuel Consumption at 100% Prime Load l/h (kg/h)

2.8

Producer

Mecc Alte

Alternatrr Model

ECP 34-2S/4 C

Frequency (Hz)

60

Power (kVA)

120

Voltage (V)

480

Phalse

3

A.V.R.

DSR

Voltage Regulation

1

Insulation Class

H

Protection Class

IP23

Nominal Power Factor

0.8

Total Generator Weight (kg)

349

Cooling Air (m³/min)

34.4

Generator and Control Module Model

DSE 7320

Standard Devices

DSE model 7320, Auto Mains Failure control module, with a highly sophisticated level of new features and functions

Static battery charger, Fuses for control circuits

Control Unit

- The DSE 7320 control module is a standard addition to our generator sets from 220 kVA upwards and it has been

designed to start and stop diesel and gas generating sets that include electronic and non electronic engines.

- The DSE 7320 includes the additional capability of being able to monitor a mains (utility) supply and is therefore suitable

for controlling a standby generating set in conjunction with an automatic transfer switch.

- The DSE7320 also indicates operational status and fault conditions, automatically shutting down the generating set and

indicating faults by means of its LCD display on the front panel.

Construction and Painting

- Components installed in sheet steel enclosure.

- Phosphate chemical, pre-coating of steel provides corrosion resistant surface

- Polyester composite powder topcoat forms high gloss and extremely durable finish

- Lockable hinged panel door provides for easy component access

Assembly

The Control panel is mounted at the generating set baseframe on robust steel stand or power module. Located at side

of generating set with properly panel visibility.

-Engine speed

-Oil pressure

-Coolant temperature

-Run time

-Battery volts

-Engine maintenance due

-Fail to start

-Emergency stop

-Low oil pressure

-High engine temperature

-Low coolant level

-Under/over speed

-Under/over generator frequency

-Under/over generator voltage

-Oil pressure sensor open

-Phase rotation

-Charge failure

-Battery under voltage

-Fail to stop

-Low fuel level (opt.)

-kW over load

-Negative phase sequence

-Loss of speed signal

-Voltage (L-L, L-N)

-Current (L1-L2-L3)

-Frequency

-Earthcurrent

-kW

-Pf

-kVAr

-kWh, kVAh, kVArh

-Phasesequence

-Earth fault

-kW over load

-Generator over current

-Negative phase sequence

-Voltage (L-L, L-N)

-Frequency

Options

- High oil temperature shut down

- Low fuel level shut down

- Low fuel level alarm

- High fuel level alarm

Options Control Panel Compatibility List

- Electrical Safety / Electro Magnetic Compatibility (EMC)

- BS EN 61000-6-2 EMC Generic Immunity Standard

- BS EN 61000-6-4 EMC Generic Emission Standard

- BS EN 60950 Electrical Safety

Static Battery Charger

- Battery charger is manufactured with switching-mode and SMD technology and it has high efficiency.

- Battery charger models' output V-I characteristic is very close to square

- 2405 has fully output shot circuit protection and it can be used as a current source.

- 2405 charger has high efficiency, long life, low failure rate, light-weight and low heat radiated in accordance

with linear alternatives.

- The charger is fitted with a protection diode across the output.

- Charge fail output is available.

- Connect charge fail relay coil between positive output and CF output.

- Input: 196-264V.

- Output: 27,6V 5A or 13,8V 5A.

Canopy

AK 40

1. Steel structures 
2. Emergency stop push button 
3. Control panel is on the right side of the set. 
4. Corrosion.resistant locks and hinges 
5. Sump drains valves 
6. Soundproof foam material 
7. Lifting Points

Introductıon

Sound-attenuated and weather-protective enclosures for generating sets from Aksa, meet event the sound requirements and provide optimum protection from inclement weather and development by our specialist acoustic engineers. Our modular designed sound insulated canopies provide ease of access for servicing and general maintenance and interchangeable components permitting on-site repair. Enclosures are designed to optimize genset cooling performance, providing you with confidence that genset ratings and ambient capability.

General Characteristics

Compact footprint, low profile design. 
Enclosure, generator set, exhaust system and fuel tank are pre-assembled, pre-integrated and shipped as one package 
Body made from steel components treated with polyester powder coating 
Fire retardant foam insulation 
Easy access to all service points 
Exhaust system inside canopy 
Large doors on each side 
Control panel viewing window in a lockable access door 
Emergency stop push button mounted on enclosure exterior 
Cooling fan and battery charging alternator fully guarded 
Fuel fill and battery can only be reached via lockable access doors. 
Lifting points on the top of canopy and base frame 
Customer options available to meet your application's needs. 
Aksa makes its generating sets' noise level tests in accordance with directive 2000/14/EC validation of the noise level test has been aproved by the notified body Szutest

Length (mm)

3105

Width (mm)

1107

Height (mm)

1803

Fuel Tank Capacity (l)

240