- Menu navigation buttons - Close mains button - Main Status and instrumentation display - Alarm LED's - Close generator button - Status LED's - Operation selecting buttons
Standard Devices
The DSE8610 is an easy to use multi-generator loadshare system, designed to synchronise up to 32 generators including electronic and non-electronic engines.
Control Unit
The DSE8610 monitors the generator and indicates operational status and fault conditions, automatically starting or stopping the engine on load demand or fault condition System alarms are annunciated on the LCD screen (multiple language options available), illuminated LED and audible sounder. The event log will record 250 events to facilitate easy maintenance. An extensive number of fixed and flexible monitoring, metering and protection features are included as well as comprehensive
communication and system expansion options.
Construction and Painting
Components installed in sheet steel enclosure.
Phosphate chemical, pre-coating of steel provides corrosion resistant surface
Polyester composite powder topcoat forms high gloss and extremely durable finish
Lockable hinged panel door provides for easy component access
Assembly
Control panel is mounted inside the container base frame on robust free-standing located at the side of generating set with properly panel visibility.
Options
High oil temperature - Shutdown
Low fuel level - Shutdown
Low fuel level - Alarm
High fuel level - Alarm
Customizable load control in parallel with the network
Wide range of ECU support
Highly configurable
Timers, Internal PLC, Force values and more are compatible with ComAp's InteliVision displays
Active e-mail messaging and SMS with communication modüle
Options Control Panel Compatibility List
ELECTRO MAGNETIC COMPATIBILITYBS EN 61000-6-2
EMC Generic Immunity Standard for the industrial Environment
BS EN 61000-6-4
EMC Generic Emission Standard for the industrial Environment
ELECTRICAL SAFETY
BS EN 60950
Safety of Information Technology Equipment, including Electrical Business Equipment
TEMPERATURE
BS EN 60068
Ab/Ae Cold Test -30oC
BS EN 60068-2-2
Bb/Be Dry Heat +70oC
VIBRATION
BS EN 60068-2-6
Ten sweeps in each of three major axes
5Hz to 8Hz @ +/-7.5mm, 8Hz to 500Hz @ 2gn
HUMIDITY
BS EN 60068-2-30
Db Damp Heat Cyclic 20/55oC @ 95% RH 48 Hours
BS EN 60068-2-78
Cab Damp Heat Static 40oC @ 93% RH 48 Hours
SHOCK
BS EN 60068-2-27
Three shocks in each of three major axes 15gn in 11mS
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES BS EN 60529
IP65 - Front of module when installed into the control panel with the supplied sealing gasket.
Static Battery Charger
Battery charger is manufactured with switching-mode and SMD technology and it has high efficiency.
Battery charger models' output V-I characteristic is very close to square
2405 has full output short circuit protection and ıt can be used as a current source.
2405 charger has high efficiency, long life, low failure rate, lightweight and low heat radiated in accordance with linear alternatives.
The charger is fitted with a protection diode across the output.
Charge fail output is available.
Connect charge fail relay coil between the positive output and CF output.
Input: 196-264V.
Output: 27,6V 5A or 13,8V 5A.
Tab 4
Canopy
GTS 10
Length (mm)
2760
Width (mm)
1100
Height (mm)
1641
Fuel Tank Capacity (l)
N/A
Tab 5
Open Group
Cabin Group
Tab 1
*Images are for illustrative purposes only; actual presentation may vary.
- TS ISO 8528-5:2022 / TS EN ISO 8528-13:2018 : Reciprocating internal combustion engine-driven alternating
current generating sets- Part:13: Safety
Quality Management Systems
ISO 9001:2015
ISO 14001:2015
ISO 45001:2018
ISO 50001:2018
ISO 27001:2013
ISO 10002:2018
(Türkçe)
(English)
(Italian)
(Japanese)
(Portuguese)
We use cookies to ensure our site works correctly, to personalize content and advertisements, to provide social media features, and to analyze our site traffic.
Engine Specifications
Alternator Features
Control Panel Features
Cabin Features
Dimensions and Weights
