Menu navigation buttons
Close mains button
Main Status and instrumentation display
Alarm LED's
Close generator button
Status LED's
Operation selecting buttons
Standard Devices
The D-500 is a next-generation genset control unit combining multi-functionality and wide communication possibilities together with a reliable and low-cost design.
Control Unit
• Battery back-up real-time clock
• Battery charge run enabled
• Battery voltage
Construction and Painting
Storage temperature: -40°C to 80°C (-40 to +176°F) Maximum humidity: 95% non-condensing. IP Protection: IP65 from front panel, IP30 from the rear (with gasket) Dimensions: 200 x 148 x 46mm (WxHxD) Panel Cut-out Dimensions: 176 x 121 mm minimum. Weight: 450 g (approx.) Case Material: High Temperature, non-flammable ABS/PC
Assembly
Installation: Flat surface mounting on a Type 1 enclosure. Rear retaining plastic brackets.
• Fuel filling & fuel theft alarms
• Idle speed control
• Combat mode support
• Multiple nominal conditions
• Contactor & MCB drive
• 4 quadrant genset power
counters
• Mains power counters
• Fuel filling counter
• Fuel consumption counter
• Modem & ethernet diagnostics
• Configurable through USB,
RS-485, Ethernet and GPRS
• Free configuration program
• Allows SMS controls
• Ready for central monitoring
Ethernet & GPRS
• Mobile genset support
• Automatic GSM geo-location
• GPS connectivity (USB&RS232)
Options
• 4-band GPRS modem (optional)
Options Control Panel Compatibility List
EU Directives Conformity
-2006/95/EC (low voltage)
-2004/108/EC (electro-magnetic compatibility)
Norms of reference:
EN 61010 (safety requirements)
EN 61326 (EMC requirements)
UL & CSA Compatibility:
• UL 6200, Controls for Stationary Engine Driven
Assemblies (File# - 20140725-E314374)
• CAN/CSA C22.2 No. 14-13 – Industrial Control
Equipment
Static Battery Charger
Battery charger is manufactured with switching-mode and SMD technology and it has high efficiency.
Battery charger models' output V-I characteristic is very close to square
2405 has fully output short circuit protection and ıt can be used as a current source.
2405 charger has high efficiency, long life, low failure rate, lightweight and low heat radiated in accordance with linear alternatives.
The charger is fitted with a protection diode across the output.
Charge fail output is available.
Connect charge fail relay coil between the positive output and CF output.
Input: 196-264V.
Output: 27,6V 5A or 13,8V 5A.
Tab 4
Canopy
AKCELL-10
Length (mm)
2200
Width (mm)
1200
Height (mm)
1688
Tab 5
Open Group
Cabin Group
Tab 1
*Images are for illustrative purposes only; actual presentation may vary.
Engine Specifications
Alternator Features
Control Panel Features
Cabin Features
Dimensions and Weights
Auxiliary Equipment