Logo
Continue

ACG 1160

ACG 1160

Fuel Type -
3Phalse
50hz

General Features

  • Model Name ACG 1160

  • Frequency (Hz) 50

  • Engine Brand and Model -

  • Alternator Brand and Model Mecc Alte - ECO 46-1,5S/4A

  • Control Panel Model AGC-4 Mk II

  • Cabinet

Product Features

  • altEngine Specifications
  • altAlternator Features
  • altControl Panel Features
  • altCabin Features
  • altDimensions and Weights

Tab 1

  • Producer

  • Engine Model

  • Cylinder and Design

  • Bore and Stroke (mm)

  • X

  • Total Cylinder Volume (L)

  • Compression Ratio

  • Engine Speed (rpm)

  • Standby Power (kW/hp)

  • Prime Power(kW/hp)

  • Block Heater (Adt)

  • Block Heater Power (Watt)

  • Governor System

  • Air Filter<br>

  • Air intake

  • Oil Capacity (L)

  • Max. Oil Temperature ⁰C (F)

  • Fuel Type

  • Injection Type

  • Fuel Pump Type

  • Operating Voltage (Vdc)

  • Battery and Capacity (Unit/Ah)

  • Cooling Method

  • Coolant Capacity (engine only)l (gal)

  • Exhaust Gas Flow (m³/min)

  • Exhaust Back Pressure in-Hg (kPa)

  • Exhaust Gas Temperature ⁰C (F)

  • Total Cooling Water Capacity (l)

  • Cooling Fan Air Flow m³/min (ft³/min)

  • Fuel Consumption at 50% Prime Load l/h (kg/h)

  • Fuel Consumption at 75% Prime Load l/h (kg/h)

  • Fuel Consumption at 100% Prime Load l/h (kg/h)

Tab 2

  • Producer

  • Mecc Alte

  • Alternatrr Model

  • ECO 46-1,5S/4A

  • Frequency (Hz)

  • 50

  • Power (kVA)

  • 1480

  • Voltage (V)

  • 400

  • Phalse

  • 3

  • A.V.R.

  • DER1

  • Voltage Regulation

  • 0.5

  • Insulation Class

  • H

  • Protection Class

  • IP23

  • Nominal Power Factor

  • 1

  • Total Generator Weight (kg)

  • 3380

  • Cooling Air (m³/min)

  • 135

Tab 3

  • Generator and Control Module Model

  • AGC-4 Mk II

  • - Terminal 1-28, power supply
    - Terminal 29-36, communication
    - Terminal 37-64, in-/outputs/load sharing
    - Terminal 65-72, governor, AVR, in-/outputs
    - Terminal 73-89, AC measuring
    - Terminal 90-97, in-/outputs
    - Terminal 98-125, engine I/F
    - Terminal 126-133, engine communication, in-/outputs
    - LED I/F and Ethernet

  • Standard Devices

  • ● Additional CAN bus based I/O (9 x CIO modules)
    ● Redundant controller
    ● Redundant CAN bus for Power mamangement
    ● N+X configuration
    ● Close Before Excitation / Run-up synchronization from 6 seconds
    ● DEIF digital AVR DVC550 support
    ● Multi purpose PIDs

  • Control Unit

  • The AGC-4 Mk II is a configurable controller that can be used in applications ranging from a single controller for one genset, to
    complete power management systems. The controller contains the 3-phase measuring circuits and all the functions required to
    protect and control a genset. The controllers can also be used to protect and control mains connections, tie breakers, and bus tie
    breakers.

  • Construction and Painting

  • Controller: IP20. DU-2 display and AOP: IP40 (IP54 with gasket: Option L).
    UL/cUL Listed: Type Complete Device, Open Type. To EN/IEC 60529

  • Assembly

  • The controller is designed for mounting inside the panel. The DU-2 display can be installed on the panel door and connected to the
    controller with a display cable.

  • ● Automatic Mains Failure sequence
    ● Multi-master Power Management
    ● Power Management Core (32dg)
    ● Power Management Extended (>32dg)
    ● RMB Transformer maintenance with up to 32 gensets
    ● PLC logic
    ● Engine CAN bus
    ● DIN rail mount
    ● Flexible Hardware

  • Options

  • ● Terminal 1-28, power supply
    ● 8 to 36 V DC supply, 11 W; 1 x status output relay; 5 x relay outputs; 2 x pulse outputs (kWh, kvarh or  configurable open collector outputs); 5 x digital inputs
    ● Terminal 29-36, communication
    ● Modbus RTU (RS-485)
    ● Profibus DP

  • Options Control Panel Compatibility List

  • ● EN/IEC 61010-1, installation category (over-voltage category) III, 600 V, pollution degree 2
    ● EN/IEC 60255-27 over-voltage category III, 600 V, pollution degree 2
    ● UL/ULC 6200:2019 1.ed, over-voltage category III, 600 V, pollution degree 2
    ● Gridcode compliant with: VDE AR-N 4110/4105 (Medium voltage, Germany, VDE AR-N 4105 (low voltage, Germany, EN 50549-1:2019 (Europe), ENA EREC G99 (United Kingdom)
    ● TÜV and UL approved
    ● Tier4 final/stageV

  • Static Battery Charger

  • Battery charger is manufactured with switching-mode and SMD technology and it has high efficiency.
    Battery charger models' output V-I characteristic is very close to square
    2405 has fully output short circuit protection and ıt can be used as a current source.
    2405 charger has high efficiency, long life, low failure rate, lightweight and low heat radiated in accordance with linear alternatives.
    The charger is fitted with a protection diode across the output.
    Charge fail output is available.
    Connect charge fail relay coil between the positive output and CF output.
    Input: 196-264V.
    Output: 27,6V 5A or 13,8V 5A.

Tab 4

  • Canopy

  • Introductıon

  • General Characteristics

  • Length (mm)

  • Width (mm)

  • Height (mm)

  • Fuel Tank Capacity (l)

Tab 5

  • Open Group
  • Cabin Group

Tab 1

alt

*Images are for illustrative purposes only; actual presentation may vary.

    • Open Group
    • Length (mm)(A)
    • Width (mm)(B)
    • Height (mm)(C)
    • Gross Weight Dry (kg.)
    • Full Tank Capacity (lt.)
    • 4730 (15,5)
    • 2099 (6,9)
    • 2972 (9,8)
    • TBD
    • -

Tab 2

alt

*Görseller temsilidir, sunumları farklılık gösterebilir.

    • Canopy Group
    • Length (mm)(A)
    • Width (mm)(B)
    • Height (mm)(C)
    • Gross Weight Dry (kg.)
    • Full Tank Capacity (lt.)
    • canopy
    • canopy
    • canopy
    • canopy
    • TBD
    • fueL_TANK_DETAILS_DRWGS

Optional Equipment

  • altEngine
  • altAlternator
  • altCabin
  • altControl Panel
  • altTransfer Board
  • altAuxiliary Equipment
  • altExhaust
  • altCabin Optionall

Engine

- Fuel-Water Seperator Filter

- Oil heater

Alternator Characteristics

- Anti-Condensation Heater

- Over sized alternator

- PMG excitation + AVR

- Main line circuit breaker

Canopy Characteristics

- Galvanized Coating

- ISO Container

- Marine Grade Paint

Control Panel

- Automatic synchronising and power control system (Multi gen-set Parallel)

- Parallel system with mains

- Transition synchronization with mains

- Alarm output relays

- Earth fault, single set

- Parallel system with mains

- Remote relay output

- Remote communication with modem

- Charge Ammeter

Transfer Panel

- Three or four pole contactor

- Three or four pole motor operated circuit breaker

Auxiliary Equipment

- Main Fuel Tank

- Automatic or manual fuel filling system

- Electrical or manual oil drain pump

- Low and high fuel level alarm

- Inlet and outlet motorized louvers

- Inlet and outlet acoustic baffles

- Tool kit for maintenance

- 1500/3000 hours maintenance kit

- Supplied with oil and coolant (-30°C)

Exhaust

- Residential Silencer

- Silencer Spark Arrester

- Critical Silencer

- Catalytic Convertor

Canopy Optional Alternator and Control Panel

Please contact to your reseller for additional Alternator, Control Panel and Breaker Switch options.

Certificates

(Türkçe)

(English)

(French)

(Spanish)

(Russian)

(Italian)

(Japanese)

(Portuguese)