APD 1100 M

Producer

Engine Model

Cylinder and Design

Bore and Stroke (mm)

X

Total Cylinder Volume (L)

Compression Ratio

Engine Speed (rpm)

Standby Power (kW/hp)

Prime Power(kW/hp)

Block Heater (Adt)

Block Heater Power (Watt)

Governor System

Air Filter<br>

Air intake

Oil Capacity (L)

Max. Oil Temperature ⁰C (F)

Fuel Type

Injection Type

Fuel Pump Type

Operating Voltage (Vdc)

Battery and Capacity (Unit/Ah)

Cooling Method

Coolant Capacity (engine only)l (gal)

Exhaust Gas Flow (m³/min)

Exhaust Back Pressure in-Hg (kPa)

Exhaust Gas Temperature ⁰C (F)

Total Cooling Water Capacity (l)

Cooling Fan Air Flow m³/min (ft³/min)

Fuel Consumption at 50% Prime Load l/h (kg/h)

Fuel Consumption at 75% Prime Load l/h (kg/h)

Fuel Consumption at 100% Prime Load l/h (kg/h)

Producer

Alternatrr Model

Frequency (Hz)

Power (kVA)

Voltage (V)

Phalse

A.V.R.

Voltage Regulation

Insulation Class

Protection Class

Nominal Power Factor

Total Generator Weight (kg)

Cooling Air (m³/min)

Generator and Control Module Model

Standard Devices

Control Unit

Construction and Painting

Assembly

Options

Options Control Panel Compatibility List

Static Battery Charger

Canopy

AK 96

1. Steel structure made from steel sheet and steel profiles. 
2. Canopy and panels made from powder-coated sheet steel. 
3. Emergency stop push button. 
4. Control panel is mounted on the baseframe . Located at the back of the generator set 
5. Cables out locations are under or back of the canopy. 
6. Corrosion-resistant locks and hinges. 
7. Oil could be drained via valve and a hose 
8. Exhaust system in the canopy. 
9. Special large access doors for easy maintenance 
10. Fuel tank is in front of the canopy,easy access to the fuel tank via lockable door. 
11. Lifting points similar to ISO container, located on each top corner of the canopy. 
12. the cap on the canopy provides easy access to radiator cap. 
13. Sound proofing materials 
14. Integrated ladder built on the side of the canopy allows access to the top of the canopy. 

Introductıon

Sound-attenuated and weather-protective enclosures for generating sets from Aksa, meet event the sound requirements and provide optimum protection from inclement weather and development by our specialist acoustic engineers. Our modular designed sound insulated canopies provide ease of access for servicing and general maintenance and interchangeable components permitting on-site repair. Enclosures are designed to optimize genset cooling performance, providing you with confidence that genset ratings and ambient capability.

General Characteristics

Compact footprint, low profile design. 
Enclosure, generator set, exhaust system and fuel tank are pre-assembled, pre-integrated and shipped as one package 
Body made from steel components treated with polyester powder coating 
Fire retardant foam insulation 
Easy access to all service points 
Exhaust system inside canopy 
Large doors on each side 
Control panel viewing window in a lockable access door 
Emergency stop push button mounted on enclosure exterior 
Cooling fan and battery charging alternator fully guarded 
Fuel fill and battery can only be reached via lockable access doors. 
Lifting points on the top of canopy and base frame 
Customer options available to meet your application's needs. 
Aksa makes its generating sets' noise level tests in accordance with directive 2000/14/EC validation of the noise level test has been approved by the notified body Szutest

Length (mm)

7500

Width (mm)

2300

Height (mm)

2548

Fuel Tank Capacity (l)

1500