APB 17 A

Get an Offer Product CONTROL SYSTEM Canopy
Product: Aksa Alternator: SC164D CONTROL SYSTEM: HGM6120CAN
INTRODUCTION

Aksa power generation system, providing optimum performance, and reliability, for stationary standby, prime power, and continuous duty applications. All generator sets are factory build, and production tested.

General Characteristics
Model Name APB 17 A
Frequency (Hz) 50
Fuel Type Diesel
Engine Made and Model Aksa - A4CRX21
Alternator Made and Model Aksa - SC164D
Control Panel Model HGM6120CAN
Canopy ACP 1A-PB
3 Phase, 50 Hz, PF 0,8
VOLTAGE STANDBY RATING (ESP) PRIME RATING (PRP) Standby Amper
kVA kW kVA kW
400/231 17 13.60 16 12.80 24.54
STANDBY RATING (ESP) : Applicable for supplying power to varying electrical load for the duration of power interruption of a reliable utility source. ESP is in accordance with ISO 8528-1. Overload is not allowed.

PRIME RATING (PRP) : Applicable for supplying power to varying electrical load for unlimited hours. PRP is in accordance with ISO 8528-1. 10 % overload capability is available for a period of 1 hour within 12-hour perod of operation.
ENGINE SPECIFICATIONS
Engine Aksa
Engine Model A4CRX21
NO. OF CYLINDERS AND BUILD 4 cylinders - in line
BORE AND STROKE mm 85 X 95
TOTAL DISPLACEMENT L 2.156
Aspiration Naturally Aspirated
COMPRESSION RATIO 18:1
RATED SPEED (RPM) d/dk 1500
OIL CAPACITY L 5.5
Standby Power (kW/HP) 16.7/22.4
Prime Power 15.2/20.4
Block Heater QTY
1
Block Heater Power (Watt)
500
Fuel Type
Diesel
Injection Type and System
Direct
Type of Fuel Pump
Direct
Governor System
Mechanic
Operating Voltage (Vdc)
12 Vdc
Battery and Capacity (Qty/Ah)
1x36
Cooling Method
Water Cooled
Cooling Fan Air Flow (m3/min)
112.64
Coolant Capacity (engine only) (l)
5.5
Total Coolant Capacity (l)
16.8
Air Filter
Dry Type
Fuel Cons. Prime With %100 Load (lt/hr)
4.59
Fuel Cons. Prime With %75 Load (lt/hr)
3.54
Fuel Cons. Prime With %50 Load (lt/hr)
2.6
ALTERNATOR SPECIFICATIONS
Manufacturer Aksa
Alternator Made and Model SC164D
Frequency (Hz) Hz 50
VOLTAGE V 400
Phase 3
A.V.R. MC460B
Voltage Regulation (+/-) 1
Insulation System H
Protection IP23
Rated Power Factor 0,8
SIZE and WEIGHT
Open Type DRY WEIGHT (kg.)
(kg.)		 LENGTH
(mm.)		 WIDTH
(mm.)		 HEIGHT
(mm.)		 TANK CAPACITY (lt.) (Lt.)
CANOPY DRY WEIGHT (kg.)
(kg.)		 LENGTH
(mm.)		 WIDTH
(mm.)		 HEIGHT
(mm.)		 TANK CAPACITY (lt.) (Lt.)
ACP 1A-PB
 1672 823 1127 32
OPTIONAL EQUIPMENTS Engine

Oil heater

Alternator

3/4 Pole Output Circuit Breaker

Anti-condensation Heater

Transfer Panel

Charge ammeter

Transfer Switch 3Pole

Transfer Switch 4 Pole

Earth Fault, single set

Auxiliary Equipment

Bulk fuel tank

Automatic filling system

Fuel-water separator filter

Low fuel level alarm

Residential silencer

Enclosure or sound proof canopy

Trailer

Manual oil drain pump

Tool kit for maintenance

CONTROL SYSTEM: HGM6120CAN
Devices

1. Auto Mains Failure Control Panel


Panel Equipments:

  • Control with HGM module
  • Static battery charger
  • Emergency stop push button


A) Generating set control module HGM6120CAN features:

  • Configurable via PC software or the front panel
  • 5 programmable inputs (configurable for digital or analog signals)
  • 4 programmable relay outputs
  • Monitors 3-phase generator and mains (utility) voltage
  • Event log (50 records)
  • Configurable timers and alarm protection thresholds
  • Automatic shutdown or alarm upon fault detection
  • Supports remote start/stop and load transfer
  • Engine pre-heat control (relay output)
  • Precision measurement and display of engine and electrical parameters
  • Engine total run time accumulation
  • Red LED indicators for alarms/shutdown
  • LCD display with backlight, supports 8 language interfaces
  • Front panel test button
  • Modular design, flush mounting


B) Metering via LCD display:

  • Generator Voltage (L-L / L-N)
  • Generator Current (L1, L2, L3)
  • Generator Frequency (Hz)
  • Generator Power (Kw)
  • Generator Power Factor (COS Φ)
  • Accumulated Generator Energy (kWh)
  • Load Percentage (%)
  • Engine Oil Pressure (kPa / psi / bar)
  • Engine Temperature (°C / °F)
  • Fuel Level (%)
  • Battery Voltage (V)
  • Charger Voltage (V)
  • Mains Voltage (L-L / L-N)


C) Alarms:

  • Under Speed / Over Speed
  • Under Voltage / Over Voltage
  • Under Frequency / Over Frequency
  • Overload / Over Current / Overpower
  • Low Engine Oil Pressure
  • High Engine Coolant Temperature
  • Low Fuel Level (Optional)
  • Low / High Battery Voltage
  • Emergency Stop
  • Charge Fail
  • Sensor Open Circuit
  • Fail to Start
  • ECU Communication Failure (for EFI engines)
  • Maintenance Due
  • Aftertreatment System Related Alarms (foraftertreatment EFI gensets)


2. Power Outlet Terminal Board Mounted on the Gen-set Base Frame

GENERATING SET CONTROL UNIT


Canopy: ACP 1A-PB
INTRODUCTION
Sound-attenuated and weather protective enclosures for generating sets from Aksa, meet event the sound requirements and provide optimum protection from inclement weather and development by our specialist acoustic engineers. Our modular designed sound insulated canopies (8 – 275kVA) fit directly to the open generator set to provide ease of access for servicing and general maintenance and interchangeable components permitting on-site repair. Enclosures are designed to optimize genset cooling performance, providing you with confidence that genset ratings and ambient capability.
STANDARD SPECIFICATIONS
Compact footprint, low profile design. 
Enclosure, generator set, exhaust system and base-tank are pre-assembled, pre-integrated and shipped as one package 
Body made from steel components treated with polyester powder coating 
Fire retardant foam insulation 
Easy access to all service points 
Exhaust system inside canopy 
Large doors on each side 
Control panel viewing window in a lockable access door 
Emergency stop push button mounted on enclosure exterior 
Cooling fan and battery charging alternator fully guarded 
Fuel fill and battery can only be reached via lockable access doors. 
Lifting points on the top of canopy and base frame 
Customer options available to meet your applications needs. 

CANOPY MODEL ACP 1A-PB
WIDTH mm. 823
LENGTH mm. 1672
HEIGHT mm. 1127
TANK CAPACITY (lt.) Lt. 32